S-QSFP(100G) to 2x/4xS-SFP(25G) Fan-out Copper Cable

Luxshare-TECH S-QSFP to 4xS-SFP copper cable assemblies consist of 8(100Ohm) differential pairs which are individually shielded. In the cable assembly each side transmits a group of 4 differential pairs each running at 25G. One end of the cable is a QSFP (28G) plug with the standard gold finger interface that complies with the mechanical dimensions of the QSFP MSA. The other end consists of 2x/4xSFP(28G) plugs that conform to SFP MSA. Each data lane will contain one DC blocking cap.


FEATURES & BENEFITS
  • Compliant with SFF-8431/SFF-8436
  • Compliant with IEEE802.3by
  • 4 independent full-duplex passive copper cable transceiver
  • Up to 28 Gbps data rate per channel
  • Mating with the standard 38-pin QSFP(28G) and 20-pin SFP(28G) board connector
  • DAC length from 0.5m~7m, ACC length up to 10m by 32AWG~26AWG high speed raw cable
  • Very excellent SI perfomance and high reliability
  • I2C based two-wire serial interface of EEPROM signal
  • Operating temperature: 0℃~+70℃
  • Storage Ambient Temperature: -40℃~+85℃
  • Power level I: Less than 30mw
  • All materials comply with RoHS
了解更多

Product Numbers Product Description
LA0QF056-SD-R S-QSFP to 4xS-SFP 25G passive cable assembly 30AWG 1m
LA0QF057-SD-R S-QSFP to 4xS-SFP 25G passive cable assembly 30AWG 2m
LA0QF058-SD-R S-QSFP to 4xS-SFP 25G passive cable assembly 30AWG 3m
LA0QF059-SD-R S-QSFP to 4xS-SFP 25G passive cable assembly 26AWG 5m
LA0QF060-SD-R S-QSFP to 4xS-SFP 25G passive cable assembly 28AWG 3m
LA0QF061-SD-R S-QSFP to 4xS-SFP 25G passive cable assembly 26AWG 3m